You’re ready to repair or replace your gutters. Now it's time to find a qualified Seattle contractor and understand local considerations that could impact your project. Explore expert gutter installation advice and read contractor reviews from real homeowners.
Provider information and all relevant data are maintained by Remodel Your Home's editorial research team. Learn about our editorial standards.
Not sure whether you need new gutters or just guards?
The most common options are seamless aluminum gutters, gutter guards or covers fitted to an existing system, and full gutter replacement including downspouts. Copper and steel are available but far less common on a typical home.
Guards make sense when the gutters themselves are sound and the problem is debris. Replacement is the better call once sections are sagging, separating at the seams, or pulling away from the fascia. Many homeowners bundle gutter replacement with roof replacement, since both crews work at the roofline.
Wondering about return on investment? Explore the home improvement ROI guide.
Seattle climate: high rainfall, mild temperatures, minimal freeze-thaw.
The wetter Pacific Northwest markets are about sustained volume rather than sudden intensity, plus a heavy load of conifer needles and moss. Fine debris passes straight through coarse screens, so micro-mesh guards hold up better here than basic mesh. Expect to clear valleys and downspout openings even with guards fitted.
Gutter Installation in Seattle usually runs $1,350–$4,400 for a standard project on an average home. That is higher than the average national rate, because labor costs are higher in Seattle. The table below compares national averages with typical Seattle pricing.
| Project type | National range | Seattle estimate |
|---|---|---|
| Seamless Aluminum Gutters | $2,000–$3,800 | $2,414–$4,587 |
| Gutter Guard Systems | $700–$3,300 | $845–$3,984 |
| 6-Inch Oversized Gutters | $2,800–$5,300 | $3,380–$6,398 |
| Copper Gutters | $7,500–$12,000 | $9,054–$14,486 |
| Gutter Repair | $200–$1,200 | $241–$1,449 |
| Fascia & Soffit Repair | $500–$3,000 | $604–$3,622 |
*All cost estimates on this page are planning estimates, not quotes. Actual costs vary by location, project scope, materials, site conditions, and contractor. See methodology and sources.
Installed cost in Seattle runs roughly 21% above the national average for this trade. Here's how we got to that number.
Project costs include three main components: labor, materials, and overhead. Material ships at national prices no matter where you live, and overhead is fairly consistent as well. So the main pricing difference between metro areas is labor costs. This is why a quote from a high-wage metro is rarely as far above the national average as people expect.
To get Seattle labor costs, we compared the average hourly wage in the Seattle-Tacoma-Bellevue, WA area to the national average hourly wage for this trade. (source: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025)
We found that the local trade wages sit about 60% above the national figure. Labor costs typically make up about 34% of a gutter installation project cost, so the weighted difference between Seattle and national averages is +21%. See methodology and sources.
It depends on the scope of your project, so you should talk to the permitting authority to find out what your project needs. In general, Seattle permitting is complex compared to other metros we cover.
Permitting in this area goes through Seattle Department of Construction & Inspections (SDCI). High rainfall makes gutter maintenance critical: leaf guard systems highly recommended.
You should ask each contractor if they pull the permits for you and if the fee for pulling permits is included in their quote. Also, tell them you need to see the written, approved permit before work starts.
Washington requires gutter installation contractors to register with the state, which is not the same as holding a license. (source, verified as of 2026-08-12) What that means and how to verify a contractor in Washington →
Here are the gutter installation companies WA homeowners in and around Seattle turn to, ranked by real customer rating and review volume, no filler. See our Editorial Standards.
LeafGuard’s one-piece seamless gutter is formed on site and fixed to the roofline rather than through the roof, and the hood design closes off the seams where clogs usually start. Reviewers name their sales rep and describe an unhurried, informative visit. One branch’s consultant is credited by name for telling a homeowner the system was not the right fit for their particular roofline rather than selling it anyway. Install crews draw the same kind of praise: homeowners describe a full house finished in a day, even in the rain, with the old gutters hauled away and the site swept clean. LeafGuard is a Great Day Improvements brand. Worth settling at the quote: the manufacturer warrants the finish while the installing branch owns the no-clog performance promise, the warranty steps down on a fixed schedule rather than transferring at full value if you sell, and homes near the coast are excluded. Ask how each of those applies to your address, and if you get heavy snow, how the hood performs in ice.
LeafFilter’s stainless steel micro-mesh is built to block debris while letting water flow through, backed by a lifetime warranty that transfers if you sell the house. A transferred warranty steps down in value over time, so it is worth confirming what is left before you rely on it. Reviewers across the network consistently praise the in-home visit and the installation crew: a rep walks through samples and pricing before anything is signed, and the crew typically finishes the job in a few hours and clears away the old material. Because the guards have to sit at the correct pitch to work as designed, ask your installer to walk you through how that is checked at installation and what their process is for a follow-up visit if one is ever needed.
We match contractors serving Seattle and surrounding communities, including:
Contractor service areas vary rather than following ZIP-code lines, so your community may still be covered even if it is not listed above. Start your match to see the options for your project and location.
We match homeowners in Seattle across every major exterior and interior trade. You get the same simple, free, no-obligation service for every project. If you're planning more than one project, it's worth requesting a combined quote if the contractor offers both types of work. This can sometimes make a project more affordable.
Yes. In general, contractors cover a defined service area, not a ZIP code. A company working one side of the metro will usually quote the other, so go ahead and find your match even if your area isn't listed.
We offer localized ratings and pricing for 1 other Washington metro area:
Choosing a gutter installation contractor in Seattle comes down to a few important questions: what it costs, who does it well, how to pay for it, and what to ask before you sign. The resources below cover those and the rest of the decision.
