You’re ready to repair or replace your gutters. Now it's time to find a qualified Denver contractor and understand local considerations that could impact your project. Explore expert gutter installation advice and read contractor reviews from real homeowners.
Provider information and all relevant data are maintained by Remodel Your Home's editorial research team. Learn about our editorial standards.
Not sure whether you need new gutters or just guards?
The most common options are seamless aluminum gutters, gutter guards or covers fitted to an existing system, and full gutter replacement including downspouts. Copper and steel are available but far less common on a typical home.
Guards make sense when the gutters themselves are sound and the problem is debris. Replacement is the better call once sections are sagging, separating at the seams, or pulling away from the fascia. Many homeowners bundle gutter replacement with roof replacement, since both crews work at the roofline.
Wondering about return on investment? Explore the home improvement ROI guide.
Denver climate: high altitude, hail corridor, cold winters, intense UV.
Snow sliding off a steep roof is the most common way gutters fail in this zone. Snow guards above the gutter line, or gutters set back from the eave edge, keep a single slide from tearing off an entire run. Hail dents aluminum and cracks vinyl, so a heavier gauge is worth the cost where hail is frequent.
Gutter Installation in Denver usually runs $1,250–$4,100 for a standard project on an average home. That is lower than the average national rate, because labor costs are lower in Denver. The table below compares national averages with typical Denver pricing.
| Project type | National range | Denver estimate |
|---|---|---|
| Seamless Aluminum Gutters | $2,000–$3,800 | $1,964–$3,731 |
| Gutter Guard Systems | $700–$3,300 | $687–$3,240 |
| 6-Inch Oversized Gutters | $2,800–$5,300 | $2,749–$5,204 |
| Copper Gutters | $7,500–$12,000 | $7,364–$11,783 |
| Gutter Repair | $200–$1,200 | $196–$1,178 |
| Fascia & Soffit Repair | $500–$3,000 | $491–$2,946 |
*All cost estimates on this page are planning estimates, not quotes. Actual costs vary by location, project scope, materials, site conditions, and contractor. See methodology and sources.
Installed cost in Denver runs roughly 2% below the national average for this trade. Here's how we got to that number.
Project costs include three main components: labor, materials, and overhead. Material ships at national prices no matter where you live, and overhead is fairly consistent as well. So the main pricing difference between metro areas is labor costs. This is why a quote from a high-wage metro is rarely as far above the national average as people expect.
To get Denver labor costs, we compared the average hourly wage in the Denver-Aurora-Centennial, CO area to the national average hourly wage for this trade. (source: US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025)
We found that the local trade wages sit about 5% below the national figure. Labor costs typically make up about 34% of a gutter installation project cost, so the weighted difference between Denver and national averages is −2%. See methodology and sources.
It depends on the scope of your project, so you should talk to the permitting authority to find out what your project needs. In general, Denver permitting is moderately complex compared to other metros we cover.
Permitting in this area goes through Denver Community Planning and Development. Document all hail events for insurance.
You should ask each contractor if they pull the permits for you and if the fee for pulling permits is included in their quote. Also, tell them you need to see the written, approved permit before work starts.
There is no Colorado state license for gutter installation. This work is governed locally. (source, verified as of 2026-08-12) What that means and how to verify a contractor in Colorado →
Here are the gutter installation companies CO homeowners in and around Denver turn to, ranked by real customer rating and review volume, no filler. See our Editorial Standards.
LeafGuard’s one-piece seamless gutter is formed on site and fixed to the roofline rather than through the roof, and the hood design closes off the seams where clogs usually start. Reviewers name their sales rep and describe an unhurried, informative visit. One branch’s consultant is credited by name for telling a homeowner the system was not the right fit for their particular roofline rather than selling it anyway. Install crews draw the same kind of praise: homeowners describe a full house finished in a day, even in the rain, with the old gutters hauled away and the site swept clean. LeafGuard is a Great Day Improvements brand. Worth settling at the quote: the manufacturer warrants the finish while the installing branch owns the no-clog performance promise, the warranty steps down on a fixed schedule rather than transferring at full value if you sell, and homes near the coast are excluded. Ask how each of those applies to your address, and if you get heavy snow, how the hood performs in ice.
Home Genius Exteriors holds Owens Corning Platinum Preferred status alongside James Hardie Elite Preferred and CertainTeed 5-Star contractor certifications, and covers roofing, siding, windows, doors, gutters and attic insulation. Reviewers name their project manager more often than almost anything else about the job, and describe them staying involved and checking in through to the finish. Siding and gutter work draws the warmest praise for how it looks once finished, and most installs wrap up in just a few days. Their free inspection is thorough and photo-led, with some homeowners noting drone footage of the roof itself. Promotional discounts are tiered by trade rather than applying across the board, so ask what your specific project qualifies for. If your roof is flat or low-slope, ask what warranty comes with it, since those systems are covered differently.
LeafFilter’s stainless steel micro-mesh is built to block debris while letting water flow through, backed by a lifetime warranty that transfers if you sell the house. A transferred warranty steps down in value over time, so it is worth confirming what is left before you rely on it. Reviewers across the network consistently praise the in-home visit and the installation crew: a rep walks through samples and pricing before anything is signed, and the crew typically finishes the job in a few hours and clears away the old material. Because the guards have to sit at the correct pitch to work as designed, ask your installer to walk you through how that is checked at installation and what their process is for a follow-up visit if one is ever needed.
We match contractors serving Denver and surrounding communities, including:
Contractor service areas vary rather than following ZIP-code lines, so your community may still be covered even if it is not listed above. Start your match to see the options for your project and location.
We match homeowners in Denver across every major exterior and interior trade. You get the same simple, free, no-obligation service for every project. If you're planning more than one project, it's worth requesting a combined quote if the contractor offers both types of work. This can sometimes make a project more affordable.
Yes. In general, contractors cover a defined service area, not a ZIP code. A company working one side of the metro will usually quote the other, so go ahead and find your match even if your area isn't listed.
We offer localized ratings and pricing for 2 other Colorado metro areas:
Choosing a gutter installation contractor in Denver comes down to a few important questions: what it costs, who does it well, how to pay for it, and what to ask before you sign. The resources below cover those and the rest of the decision.
